Vulcan PVA Dropper Low Profile Version
Simple PVA dropper designed to keep your PVA bags off the standard door flaps and away from the water to keep them dry whilst being driven out in the boat.
Unfortunately the Vulcan standard hopper doors can let a small amount of water pass through them during driving, this can melt your bag on the way to your spot and stop you delivering your PVA bag as intended.
We’ve designed this Low profile PVA dropper to be a cheap cost effective way of keeping your bags dry from the underneath.
Can be used with a Hopper cover (GS Tackle version still in prototype) or other manufacturers hopper covers.
The PVA Dropper consists of the following parts :
Main body, this is just drop into the hull and has been perfectly matched to the Hull design of the Vulcan - and as you would expect fit’s like a glove.
It also incorporates a cut-out to allow the use of the GS Tackle Drop in Rear Deeper at the same time.
The body is split in half at the rear, to still allow the great top-loading feature of the Vulcan, however is still robust enough for continued use for years to come.
Bombay Doors / Flaps, these have been specially designed to have a perfect rounded contact point with the original hopper doors, this minimises friction and allows the flaps to be shut as the original doors are shut - so no messing around holding the flaps out the way or having to remove the system and reset every time.
Pivoting Bushes / Screws, we utilised the same technology from the Vulcan Rear mount to ensure screws could be fully tightened without “pinching” the body together - this give a nice resistance free loose design without the fear of it coming unattached. To do this we utilise plastic bushes with plastic welded inserts into the flaps.
Instructions to use :-
Open the hopper doors, insert the PVA dropper.
Close the hopper doors
Load your PVA bag onto the dropper
Close the rear latch of the boat
When putting out the second rod, please ensure to dry any water from the flaps before placing a bag on it !
Manufactured from the highest quality 3D printed ASA filament - will not fade or distort in sunlight
Will be supplied already fully assembled ready to use.
Main body will be black, optional coloured flaps (only Red, Blue & Grey ASA Available currently) please make your selection when ordering.
Some photo’s show boat fitted with GS Tackle Rear Deeper mount - mount is not included in this product.
Simple PVA dropper designed to keep your PVA bags off the standard door flaps and away from the water to keep them dry whilst being driven out in the boat.
Unfortunately the Vulcan standard hopper doors can let a small amount of water pass through them during driving, this can melt your bag on the way to your spot and stop you delivering your PVA bag as intended.
We’ve designed this Low profile PVA dropper to be a cheap cost effective way of keeping your bags dry from the underneath.
Can be used with a Hopper cover (GS Tackle version still in prototype) or other manufacturers hopper covers.
The PVA Dropper consists of the following parts :
Main body, this is just drop into the hull and has been perfectly matched to the Hull design of the Vulcan - and as you would expect fit’s like a glove.
It also incorporates a cut-out to allow the use of the GS Tackle Drop in Rear Deeper at the same time.
The body is split in half at the rear, to still allow the great top-loading feature of the Vulcan, however is still robust enough for continued use for years to come.
Bombay Doors / Flaps, these have been specially designed to have a perfect rounded contact point with the original hopper doors, this minimises friction and allows the flaps to be shut as the original doors are shut - so no messing around holding the flaps out the way or having to remove the system and reset every time.
Pivoting Bushes / Screws, we utilised the same technology from the Vulcan Rear mount to ensure screws could be fully tightened without “pinching” the body together - this give a nice resistance free loose design without the fear of it coming unattached. To do this we utilise plastic bushes with plastic welded inserts into the flaps.
Instructions to use :-
Open the hopper doors, insert the PVA dropper.
Close the hopper doors
Load your PVA bag onto the dropper
Close the rear latch of the boat
When putting out the second rod, please ensure to dry any water from the flaps before placing a bag on it !
Manufactured from the highest quality 3D printed ASA filament - will not fade or distort in sunlight
Will be supplied already fully assembled ready to use.
Main body will be black, optional coloured flaps (only Red, Blue & Grey ASA Available currently) please make your selection when ordering.
Some photo’s show boat fitted with GS Tackle Rear Deeper mount - mount is not included in this product.
Simple PVA dropper designed to keep your PVA bags off the standard door flaps and away from the water to keep them dry whilst being driven out in the boat.
Unfortunately the Vulcan standard hopper doors can let a small amount of water pass through them during driving, this can melt your bag on the way to your spot and stop you delivering your PVA bag as intended.
We’ve designed this Low profile PVA dropper to be a cheap cost effective way of keeping your bags dry from the underneath.
Can be used with a Hopper cover (GS Tackle version still in prototype) or other manufacturers hopper covers.
The PVA Dropper consists of the following parts :
Main body, this is just drop into the hull and has been perfectly matched to the Hull design of the Vulcan - and as you would expect fit’s like a glove.
It also incorporates a cut-out to allow the use of the GS Tackle Drop in Rear Deeper at the same time.
The body is split in half at the rear, to still allow the great top-loading feature of the Vulcan, however is still robust enough for continued use for years to come.
Bombay Doors / Flaps, these have been specially designed to have a perfect rounded contact point with the original hopper doors, this minimises friction and allows the flaps to be shut as the original doors are shut - so no messing around holding the flaps out the way or having to remove the system and reset every time.
Pivoting Bushes / Screws, we utilised the same technology from the Vulcan Rear mount to ensure screws could be fully tightened without “pinching” the body together - this give a nice resistance free loose design without the fear of it coming unattached. To do this we utilise plastic bushes with plastic welded inserts into the flaps.
Instructions to use :-
Open the hopper doors, insert the PVA dropper.
Close the hopper doors
Load your PVA bag onto the dropper
Close the rear latch of the boat
When putting out the second rod, please ensure to dry any water from the flaps before placing a bag on it !
Manufactured from the highest quality 3D printed ASA filament - will not fade or distort in sunlight
Will be supplied already fully assembled ready to use.
Main body will be black, optional coloured flaps (only Red, Blue & Grey ASA Available currently) please make your selection when ordering.
Some photo’s show boat fitted with GS Tackle Rear Deeper mount - mount is not included in this product.