Vulcan PVA Dropper Full Size Version
Full Protection PVA dropper designed to keep your PVA bags off the standard door flaps away from the water and sheltered from rain to keep them dry whilst being driven out in the boat.
The PVA Dropper comes with a hinged Lid and self closing flaps (when the original hopper doors are closed)
The lid can be opened & closed regardless of the position of the rear locking latch, and the body is designed to maximise the space available between the strengthening cross-brace on the Vulcan boat and the rear locking mechanism of the rear latch.
The PVA Dropper consists of the following parts :
Main body, this is just drop into the hull and has been perfectly matched to the Hull design of the Vulcan - and as you would expect fit’s like a glove.
It also incorporates a cut-out to allow the use of the GS Tackle Drop in Rear Deeper at the same time.
The body is split in half at the rear, to still allow the great top-loading feature of the Vulcan, however is still robust enough for continued use for years to come.
The upper edge of the main body contains a lip that fit’s inside of the lid to stop any water getting in.
Lid, this has been designed to overhang the slot to provide greater protection from rain over the rear line slot.
The lid also incorporates a wedge design that fits into the main body when the lid is closed, this serves two purposes : it creates a nice friction point to keep the lid firmly shut and it also keeps the main body tensioned open.
Bombay Doors / Flaps, these have been specially designed to have a perfect rounded contact point with the original hopper doors, this minimises friction and allows the flaps to be shut as the original doors are shut - so no messing around holding the flaps out the way or having to remove the system and reset every time.
Pivoting Bushes / Screws, we utilised the same technology from the Vulcan Rear mount to ensure screws could be fully tightened without “pinching” the body together - this give a nice resistance free loose design without the fear of it coming unattached. To do this we utilise plastic bushes with plastic welded inserts into the flaps.
Instructions to use :-
Open the hopper doors, insert the PVA dropper.
Close the hopper doors
Load your PVA bag onto the dropper
Close the lid
Close the rear latch of the boat
When putting out the second rod, please ensure to dry any water from the flaps before placing a bag on it !
Manufactured from the highest quality 3D printed ASA filament - will not fade or distort in sunlight
Will be supplied already fully assembled ready to use.
Main body and flaps will be black, optional coloured Lid (Red, Blue, Grey & White ASA Available currently) please make your selection when ordering.
PLEASE NOTE : This PVA dropper is designed for the mk1 Vulcan and is NOT compatible with the mk2 Vulcan.
Some photo’s show boat fitted with GS Tackle Rear Deeper mount - mount is not included in this product.
Full Protection PVA dropper designed to keep your PVA bags off the standard door flaps away from the water and sheltered from rain to keep them dry whilst being driven out in the boat.
The PVA Dropper comes with a hinged Lid and self closing flaps (when the original hopper doors are closed)
The lid can be opened & closed regardless of the position of the rear locking latch, and the body is designed to maximise the space available between the strengthening cross-brace on the Vulcan boat and the rear locking mechanism of the rear latch.
The PVA Dropper consists of the following parts :
Main body, this is just drop into the hull and has been perfectly matched to the Hull design of the Vulcan - and as you would expect fit’s like a glove.
It also incorporates a cut-out to allow the use of the GS Tackle Drop in Rear Deeper at the same time.
The body is split in half at the rear, to still allow the great top-loading feature of the Vulcan, however is still robust enough for continued use for years to come.
The upper edge of the main body contains a lip that fit’s inside of the lid to stop any water getting in.
Lid, this has been designed to overhang the slot to provide greater protection from rain over the rear line slot.
The lid also incorporates a wedge design that fits into the main body when the lid is closed, this serves two purposes : it creates a nice friction point to keep the lid firmly shut and it also keeps the main body tensioned open.
Bombay Doors / Flaps, these have been specially designed to have a perfect rounded contact point with the original hopper doors, this minimises friction and allows the flaps to be shut as the original doors are shut - so no messing around holding the flaps out the way or having to remove the system and reset every time.
Pivoting Bushes / Screws, we utilised the same technology from the Vulcan Rear mount to ensure screws could be fully tightened without “pinching” the body together - this give a nice resistance free loose design without the fear of it coming unattached. To do this we utilise plastic bushes with plastic welded inserts into the flaps.
Instructions to use :-
Open the hopper doors, insert the PVA dropper.
Close the hopper doors
Load your PVA bag onto the dropper
Close the lid
Close the rear latch of the boat
When putting out the second rod, please ensure to dry any water from the flaps before placing a bag on it !
Manufactured from the highest quality 3D printed ASA filament - will not fade or distort in sunlight
Will be supplied already fully assembled ready to use.
Main body and flaps will be black, optional coloured Lid (Red, Blue, Grey & White ASA Available currently) please make your selection when ordering.
PLEASE NOTE : This PVA dropper is designed for the mk1 Vulcan and is NOT compatible with the mk2 Vulcan.
Some photo’s show boat fitted with GS Tackle Rear Deeper mount - mount is not included in this product.
Full Protection PVA dropper designed to keep your PVA bags off the standard door flaps away from the water and sheltered from rain to keep them dry whilst being driven out in the boat.
The PVA Dropper comes with a hinged Lid and self closing flaps (when the original hopper doors are closed)
The lid can be opened & closed regardless of the position of the rear locking latch, and the body is designed to maximise the space available between the strengthening cross-brace on the Vulcan boat and the rear locking mechanism of the rear latch.
The PVA Dropper consists of the following parts :
Main body, this is just drop into the hull and has been perfectly matched to the Hull design of the Vulcan - and as you would expect fit’s like a glove.
It also incorporates a cut-out to allow the use of the GS Tackle Drop in Rear Deeper at the same time.
The body is split in half at the rear, to still allow the great top-loading feature of the Vulcan, however is still robust enough for continued use for years to come.
The upper edge of the main body contains a lip that fit’s inside of the lid to stop any water getting in.
Lid, this has been designed to overhang the slot to provide greater protection from rain over the rear line slot.
The lid also incorporates a wedge design that fits into the main body when the lid is closed, this serves two purposes : it creates a nice friction point to keep the lid firmly shut and it also keeps the main body tensioned open.
Bombay Doors / Flaps, these have been specially designed to have a perfect rounded contact point with the original hopper doors, this minimises friction and allows the flaps to be shut as the original doors are shut - so no messing around holding the flaps out the way or having to remove the system and reset every time.
Pivoting Bushes / Screws, we utilised the same technology from the Vulcan Rear mount to ensure screws could be fully tightened without “pinching” the body together - this give a nice resistance free loose design without the fear of it coming unattached. To do this we utilise plastic bushes with plastic welded inserts into the flaps.
Instructions to use :-
Open the hopper doors, insert the PVA dropper.
Close the hopper doors
Load your PVA bag onto the dropper
Close the lid
Close the rear latch of the boat
When putting out the second rod, please ensure to dry any water from the flaps before placing a bag on it !
Manufactured from the highest quality 3D printed ASA filament - will not fade or distort in sunlight
Will be supplied already fully assembled ready to use.
Main body and flaps will be black, optional coloured Lid (Red, Blue, Grey & White ASA Available currently) please make your selection when ordering.
PLEASE NOTE : This PVA dropper is designed for the mk1 Vulcan and is NOT compatible with the mk2 Vulcan.
Some photo’s show boat fitted with GS Tackle Rear Deeper mount - mount is not included in this product.