Vulcan mk1 Hopper Divider
The Vulcan Hopper Divider is designed to split the massive single hopper of the Vulcan into two separate hoppers so you can potentially rebait two separate spots without bringing the bait boat back to shore to refill.
The Hopper divide is designed to be quick and easily mounted to allow the use of single or dual hoppers depending on the situation.
To allow the quick connection part of the mount remains attached to the boat, however we have designed it so the remaining part is hidden under the handle of the boat and does not impact the usability of the boat when the divider is not being used.
Once the under-the-handle mount is assembled onto the boat, the boat can be converted between single hopper and dual hoppers in approx 15 seconds, without any tools or screws.
We have designed the parts to be really robust, but lightweight and fit the hull of the Vulcan like a glove.
The hopper divide also features a rounded end to the rear of the divider plate to aid line guidance down either side of the plate.
There is a short gap between the divider plate and the rear of the boat, this is to allow the use of the standard rear plastic hull spacer - and of course our GS Tackle Rear Deeper mount.
Manufactured from the highest quality 3D printed ASA filament - will not fade or distort in sunlight
Supplied partly assembled, fitment to the boat take approx 5 minutes - please click here for fitment instructions.
All screws are Black coated Stainless Steel, supplied with allen key for assembly.
PLEASE NOTE : This Hopper divider ONLY fits the mk1 Vulcan boat with the rear cross brace, and NOT the MK2.
This is designed to be used with the clip on handle that is provided with the boat, if you don’t use the clip on handle then you may find the mounting assembly a little uncomfortable to use.
Please select Standard for the normal hopper divider, please ONLY select Custom if advised to after discussing your needs with us directly.
The Vulcan Hopper Divider is designed to split the massive single hopper of the Vulcan into two separate hoppers so you can potentially rebait two separate spots without bringing the bait boat back to shore to refill.
The Hopper divide is designed to be quick and easily mounted to allow the use of single or dual hoppers depending on the situation.
To allow the quick connection part of the mount remains attached to the boat, however we have designed it so the remaining part is hidden under the handle of the boat and does not impact the usability of the boat when the divider is not being used.
Once the under-the-handle mount is assembled onto the boat, the boat can be converted between single hopper and dual hoppers in approx 15 seconds, without any tools or screws.
We have designed the parts to be really robust, but lightweight and fit the hull of the Vulcan like a glove.
The hopper divide also features a rounded end to the rear of the divider plate to aid line guidance down either side of the plate.
There is a short gap between the divider plate and the rear of the boat, this is to allow the use of the standard rear plastic hull spacer - and of course our GS Tackle Rear Deeper mount.
Manufactured from the highest quality 3D printed ASA filament - will not fade or distort in sunlight
Supplied partly assembled, fitment to the boat take approx 5 minutes - please click here for fitment instructions.
All screws are Black coated Stainless Steel, supplied with allen key for assembly.
PLEASE NOTE : This Hopper divider ONLY fits the mk1 Vulcan boat with the rear cross brace, and NOT the MK2.
This is designed to be used with the clip on handle that is provided with the boat, if you don’t use the clip on handle then you may find the mounting assembly a little uncomfortable to use.
Please select Standard for the normal hopper divider, please ONLY select Custom if advised to after discussing your needs with us directly.
The Vulcan Hopper Divider is designed to split the massive single hopper of the Vulcan into two separate hoppers so you can potentially rebait two separate spots without bringing the bait boat back to shore to refill.
The Hopper divide is designed to be quick and easily mounted to allow the use of single or dual hoppers depending on the situation.
To allow the quick connection part of the mount remains attached to the boat, however we have designed it so the remaining part is hidden under the handle of the boat and does not impact the usability of the boat when the divider is not being used.
Once the under-the-handle mount is assembled onto the boat, the boat can be converted between single hopper and dual hoppers in approx 15 seconds, without any tools or screws.
We have designed the parts to be really robust, but lightweight and fit the hull of the Vulcan like a glove.
The hopper divide also features a rounded end to the rear of the divider plate to aid line guidance down either side of the plate.
There is a short gap between the divider plate and the rear of the boat, this is to allow the use of the standard rear plastic hull spacer - and of course our GS Tackle Rear Deeper mount.
Manufactured from the highest quality 3D printed ASA filament - will not fade or distort in sunlight
Supplied partly assembled, fitment to the boat take approx 5 minutes - please click here for fitment instructions.
All screws are Black coated Stainless Steel, supplied with allen key for assembly.
PLEASE NOTE : This Hopper divider ONLY fits the mk1 Vulcan boat with the rear cross brace, and NOT the MK2.
This is designed to be used with the clip on handle that is provided with the boat, if you don’t use the clip on handle then you may find the mounting assembly a little uncomfortable to use.
Please select Standard for the normal hopper divider, please ONLY select Custom if advised to after discussing your needs with us directly.